UGT-07 Portable Corn Thresher with Tractor

UGT-07 Corn Thresher with Tractor:

VIDEO:

Fully Automatic Corn Thresher:
Fully automatic corn thresher doesn’t need manual feeding. There has a mixing device in the front of the machine.

Fully Automatic Corn Thresher Application Range:
It is suitable for the place where has large planting area of corn. It realizes automatic feeding and can save both time and labor.

Fully Automatic Corn Thresher Main Structure:
Gathering unit: it can gather the corncobs.
Transmission unit: it can convey the corncobs to the separation device.
Threshing unit: it threshes the corncobs.
Separation and cleaning unit: the mesh screen cleaning device can separate the corn kernels and corncobs. The air draft device can remove the light kernels.
Auxiliary device: this includes disconnecting device, transmission gear, safety device and so on.

Fully Automatic Corn Thresher Technical parameter:

Please note: 
1)Please tell us how many HPs you require;
2)Do you need only threshing or both husking and threshing? Our this model has different types, which can meet your different requirements.

Fully Automatic Corn Threshing Machine Main Structure:
Gathering unit: it can gather the corncobs.
Transmission unit: it can convey the corncobs to the separation device.
Threshing unit: it threshes the corncobs.
Separation and cleaning unit: the mesh screen cleaning device can separate the corn kernels and corncobs. The air draft device can remove the light kernels.
Auxiliary device: this includes disconnecting device, transmission gear, safety device and so on.

Fully Automatic Corn Thresher Operation Attentions:
During the operation of large-scale automatic feeding corn thresher, the speed of the vehicle should not be too fast or too slow. Otherwise, the feed port will be blocked. The feeding should be uniform. If the feeding is not uniform, it may cause the corn cob to break, the low output or blockage.


Fully Automatic Corn Thresher Troubleshooting:
1. The front hopper is too close to the ground, causing the large angle iron to scrape.
2, the belt is too loose, adjust the rafter to reinstall the belt.
3, the clutch is too loose, the clutch U-shaped card can be loosened a few times.
4, the chain: the two sprocket does not collide, the chain is too loose.
5, the big belt deviation: adjust the front side of the hopper under the two sides of the screw, the upper belt deviation, adjust the left side of the trough.
6. The thresher does not turn: the clutch is too loose, adjust the clutch lever to make the clutch tight.

After-Sales Service:

1. Technical Consultation:
If you have problems when using our machine, please read the instructions first.
If you can’t solve the problem, then don’t hesitate to contact us. Our engineer will provide customized technical support for you from each time!
2. Maintenance:
1)We would supply you with the maintenance guide from each time.
2)All accessories are guaranteed to be ready in your place within 72 hours.
3)All accessories required by customers should be unconditionally satisfied!
4)Please keep in mind that you should also do the related necessary work according to the instructions before and after each time of operation. Considerate maintenance brings you the longer service life of your machine.
3. One-Year Quality Guarantee:
The machine has one-year quality guarantee. During the guarantee period, if the main body is defective as the bad quality without any workers’ wrong operation, we should replace the parts for free.